5 Series E39 525tds (M51) TOUR
Unfasten clips (1 to 3) and remove water hoses. Carefully blow
through lines to remove remaining coolant from heating element.
Installation:
Filling and bleeding the cooling system,
Unfasten screws on end wall.
Unfasten screws and remove pressure and suction pipe.
Installation:
Replace sealing rings.
Subsequent tasks are described in the section Removing and
installing/replacing heater.
RA Removing and installing / replacing heater (automatic air conditioner)
BMW AG - TIS
20.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
