5 Series E39 525tds (M51) TOUR
Installation:.
Slide connectin rail over both linkages until the ends of both
linkages are visitble in the bore (1).
Pull both linkages out of the flaps.
Unfasten clips and remove blower cover from lugs (1).
Installation:.
First insert lugs in the cover, then attach the clips.
Remove connector, unfasten screws and remove blower.
RA Removing and installing / replacing heater blower.
BMW AG - TIS
20.02.2013 14:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -