5 Series E39 525tds (M51) TOUR
64 12 505
Removing and installing / replacing glow
element (Thermo Top S)
Release screws and turn over heater.
Release screws and remove central cover.
Disconnect all plug connections. Release screws and remove pull
relief. Place wiring harness to one side.
Installation:
Cable tie (1) must be located in front of pull relief.
RA Removing and installing / replacing glow element (Thermo Top S)
BMW AG - TIS
20.02.2013 14:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
