5 Series E39 525tds (M51) TOUR
Installation summary of right retaining screw:
1.
Bolt
2.
Washer
3.
Safety belt lock on right safety belt
4.
Observe coding (5) for safety belt lock of center safety belt.
Lug faces upward during installation.
Installation:
Lug (2) must engage in hole (1).
Unfasten bolt from left top belt.
Installation:
Mounting bracket (2) of left top belt must contact threaded pin (1)
during installation for proper positioning.
Caution!
Make sure webbing does not rub anywhere!
Tightening Torque,
refer to Technical Data 72 11 1AZ
RA Removing and installing/replacing left or right rear safety belt
BMW AG - TIS
20.02.2013 15:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
