5 Series E39 528i (M52) SAL
11 51 000
Removing and installing complete water
pump (M52 / S52 / M52TU / M54 / M56)
Remove alternator drive belt.
Note:
M52 / S52
Water drain plug is located on exhaust side between cylinders 4
and 5 in engine block (illustration).
M52TU / M54 / M56
Water drain plug is located on exhaust side on cylinder 2 in engine
block.
Drain and dispose of coolant.
Installation:
Replace seal.
Tightening torque 11 11 5AZ
.
Vent cooling system and check for leaks.
Release belt pulley.
RA Removing and installing complete water pump (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
21.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -