bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Intake Air Manifold (M52)|Page 682 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52_S52)|Page 679
Page 1
background image

11 61 050

Removing and installing intake air manifold
(M52)

Note instructions on removing and disconnecting battery,

refer to General Information MG 12

Disconnect negative battery lead.

Removing intake air housing with mass air flow sensor,

refer to 13 71 000

Only E39

Remove cover on windshield and left air duct. This operation is
described in section on removing complete wiper console,

refer to 61 61 270

Lift off cover (1).

Unclip positive battery lead by pulling downwards.

RA  Removing and installing intake air manifold (M52)

BMW AG - TIS

21.02.2013  15:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Intake Air Manifold (M52)|Page 682 > < 1 RA Removing And Installing_replacing Coolant Thermostat (M52_S52)|Page 679