5 Series E39 528i (M52) SAL
13 54 060
Removing and installing or replacing throttle
body (ASC+T) (M52)
Switch off ignition.
Disconnect plug connection (1).
Installation:
Fit hose for crankcase venting to suction hose.
Disconnect cable.
Installation:
Adjust Bowden cable with clearance of 0.5 - 1 mm.
Check gasket (1) for damage and replace if necessary.
Installation:
To facilitate assembly, coat gasket with acid-free grease.
RA Removing and installing or replacing throttle body (ASC+T) (M52)
BMW AG - TIS
21.02.2013 16:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
