5 Series E39 528i (M52) SAL
36 00 ...
General information, series light alloy disk
wheel E 39
Note:
All E 39 vehicles are fitted as standard with light alloy disk
wheels which it is difficult to distinguish visually from steel
disk wheels.
Identifying features:
-
Sticker on light alloy disk wheel. (1) = Indication "Alumin
um"
-
Wall thickness of rim dish: approx. 8 mm.
-
Light alloy disk wheels are not magnetic.
-
Light alloy disk wheels can be identified from their BMW parts
numbers, refer to BMW Parts Service.
Caution!
-
Use only special hub caps for E39. When using different
hub caps, these can be damaged by the smaller
diameter of the clamping surface, resulting in loss.
-
Use only BMW-approved two-part balancing weights.
-
When fitting two-part balancing weights, always use
specified tools.
-
Do not straighten light alloy disk wheels: always replace
damaged light alloy disk wheels.
-
Notches in light alloy disk wheels can lead to cracking.
-
Do not lubricate wheel nuts.
-
When fitting tires, avoid damaging light alloy disk wheels,
e.g. on sharp-edged retaining claws on fitting machine.
RA General information, series light alloy disk wheel E 39
BMW AG - TIS
21.02.2013 21:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -