5 Series E39 528i (M52) SAL
Up to 1996 model:
Unfasten screw.
Tightening torque, refer to Technical Data 52 10 5AZ
Unclip inner finisher (1) and pull forwards (2) to remove.
Up to 1996 model:
Unfasten screws and lift out front seat.
Note:
If the screws are not accessible, dismantle seat rail finishers
inside,
refer to 52 17 010
As of model year 1996:
Unfasten screws (1) and lift out front seat.
Note:
If the screws are not accessible, dismantle seat rail finishers
inside,
refer to 52 17 010
Installation:
Floor carpet must not enter area between seat rails and floor
panel beside screw points (grating noises).
Tightening sequence:
Tightening torque, refer to Technical Data 52 10 1AZ
Front inner, outer then rear inner, outer.
RA Removing and installing left or right front seat (normal / electric)
BMW AG - TIS
22.02.2013 01:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -