5 Series E39 528i (M52TU) SAL
Remove oil pump.
If oil pump and oil scraper are two parts:
Remove oil scraper.
Note:
Figure shows crankshaft removed.
On engines with spray nozzles for piston cooling on cylinder
underside:
Important!
When removing and installing pistons, make sure the piston
cooling spray nozzles are not damaged.
Installation:
Screw threads are coated with screw securing adhesive (Loctite).
Replace screws.
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
Unscrew conrod bearing cover.
RA Removing and installing or replacing all pistons (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
20.02.2013 05:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -