5 Series E39 528i (M52TU) SAL
51 16 ...
Removing and installing/replacing center
armrest
Remove center armrest sliding unit.
Lever trims (1) out of sliding unit (2).
Installation:
Replace trims (1).
Drive pin (1) with sleeve (2) out of sliding unit (3).
Pull sliding unit (3) apart and release screws (1).
Caution!
The next work step must be carried out with the assistance of
a second person (risk of injury).
The second person must pull the sliding unit (3) apart (spring
pressure) until the screws (4) are accessible.
Release screws (4) and remove center armrest (2).
RA Removing and installing/replacing center armrest
BMW AG - TIS
20.02.2013 14:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -