5 Series E39 528i (M52TU) TOUR
Detach idle actuator (2) from rubber retainer (4).
Always replace gasket (1) from idle actuator (2) to intake air
manifold. However, during reinstallation, do not fit gasket on idle
actuator but install first in intake air manifold.
Installation:
Replace seal (1).
Coat gasket (1) on inside with antiseize agent.
Note:
Interrogate fault memory of DME control unit.
Check stored fault messages.
Rectify faults.
Then clear fault memory.
RA Replacing idle speed control valve (M52TU, M54)
BMW AG - TIS
20.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -