5 Series E39 528i (M52TU) TOUR
24 35 505
Replacing wiring harness for automatic
transmission (A4S 270R/ 310R)
Oil pan removed
Remove oil strainer,
refer to 24 31 155 .
Pull plugs (1 ... 5) off of solenoid valves.
Important!
Pry off plug with a screwdriver.
Do not pull off plug on wires.
Plug type up to 01.97:
Support front end of transmission on case.
Remove cross member.
Unscrew nut (6) on plug connection.
Pull out plug connection.
Installation:
Check seal (7).
Install plug connection that flat side faces up.
Tightening torque,
Refer to Technical Data.
RA Replacing wiring harness for automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
20.02.2013 15:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -