5 Series E39 528i (M52TU) TOUR
33 32 091
Replacing one traction strut
Caution!
After assembly, perform rear wheel alignment
check/adjustment.
Remove wheel,
refer to 36 10 300.
Unfasten nut.
Unscrew and remove eccentric screw.
Installation:
Replace nut.
Fit eccentric washer (1).
Tightening Torque,
refer to Technical Data 33 32 5AZ.
Unfasten nut; if necessary brace on hex head.
Installation:
Tapered pin and bore free of grease.
Replace nut.
Tightening Torque,
refer to Technical Data 33 32 4AZ.
RA Replacing one traction strut
BMW AG - TIS
20.02.2013 17:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -