5 Series E39 528i (M52TU) TOUR
Note:
Mark position of shock absorber.
Unfasten inner nuts (1) and pull off shock absorber (2) toward
rear.
For tightening torque, refer to Technical Data 51 12 2AZ
Installation:
To adjust bumper height, loosen nuts (1) and adjust bumper
height.
Installation:
Install seal (1) on shock absorber (2).
RA Replacing one shock absorber for rear bumper (touring)
BMW AG - TIS
20.02.2013 21:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -