5 Series E39 528i (M52TU) TOUR
Summary of rear grab handle bracket.
1.
Saloon
2.
Touring
Installation:
Ensure that ITS head airbag is correctly positioned in rear
grab handle bracket.
The retaining clip (2) of the rear grab handle bracket (1) must be
above the ITS head airbag (3).
Important!
The retaining clip (2) must not have any sharp edges in the
area of the ITS head airbag!
Danger of damage to the ITS head airbag!
Replace bracket for rear grab handle if necessary.
Release rear retaining screw (1).
Note:
Retaining screw (1) is held in place by a locking washer in end
fitting (2).
Installation:
Tightening torque,
refer to Technical Data 72 12 4AZ
Remove ITS head airbag.
View of rear retaining screw with end fitting of ITS head airbag
1.
End fitting of ITS head airbag
2.
Lock washer
3.
Retaining screw, rear
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
21.02.2013 05:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -