5 Series E39 530d (M57) SAL
7.
Set the correct "wheelbase" using the submenu "Dealer Calibration":
a) Call up "Dealer Calibration":
- Press the "Menu" button
- Select "Information" and press to activate
- Select "Location" and press to activate
- Press and hold the "Menu" button for approx. 5 s
b)Set the "wheelbase":
- Select "Setting the vehicle values"
- Under "Wheelbase", set the vehicle type (E38 short or long, or E39; do not select
Type A or Type B) and confirm with "Continue" (also necessary if the vehicle type
displayed was correct).
- Quit dealer calibration by means of "Exit"
This measure allows the customer to select the tyre size him- or herself after changing
the wheels or tyres and therefore to carry out a wheel/tyre calibration him- or herself.
The procedure is described in the enclosure entitled "Additional Functions in the
Navigation System" and is not included in the operating instructions. The customer
must therefore be supplied with a copy of this enclosure.
8.
Reinsert the map CD into the navigation computer.
9.
Give the customer a copy of the enclosure "Additional Functions in the Navigation
System" (also available as a separate print, see Parts)
Parts:
Separate print "Additional Functions in the
Navigation System"
Part no. 01 40 9 789 900 (German)
Part no. 01 41 9 790 131 (English)
Part no. 01 42 9 790 132 (French)
Part no. 01 43 9 790 133 (Spanish)
Part no. 01 44 9 790 134 (Italian)
Part no. 01 45 9 790 135 (Swedish)
Part no. 01 46 9 790 136 (Dutch)
Note:
The CD Software 6.1 (part no. 01 59 9 789 299) has already been sent to the markets
affected free of charge in accordance with publication distributor (VT-32).
SI Loading Operating Software E38 E39 with Navigation
BMW AG - TIS
20.02.2013 10:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -