5 Series E39 530d (M57) SAL
Place special tool 11 6 321 on exhaust camshaft.
Tighten down exhaust sprocket wheel with special tool
00 9 120 and secure.
Tightening torque, 11 31 4AZ.
Remove special tool 11 6 321 from exhaust camshaft.
Pull special tool 11 2 300 back until flywheel is no longer
secured in position.
Using special tool 11 6 480 , crank engine twice in direction of
rotation until first cylinder is shortly before firing TDC position.
RA Removing and installing cylinder head (M57)
BMW AG - TIS
20.02.2013 11:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -
