5 Series E39 530d (M57) SAL
Place special tool 11 3 136 (rubber mat) for protecting valves
against damage on special tool 11 3 132 .
Caution!
Do not damage sealing surface of cylinder head.
Cover special tool 11 1 065 (assembly frame) in area (1) of
cylinder head seat with insulating tape or similar material.
Position cylinder head on special tool 11 1 065 and secure with
commercially available M10 screws (1).
Remove all valve stem seals,
refer to 11 34 560 .
Remove valves downwards and put down in an orderly fashion.
RA Dismantling and assembling cylinder head (M57)
BMW AG - TIS
20.02.2013 11:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
