5 Series E39 530d (M57) SAL
11 28 060
Removing and installing A/C compressor belt
tensioner (M57 / M47TU)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Remove and install fan cowl.
Remove front splash guard.
Press belt tensioner back at hexagon head (1).
Remove drive belt (2).
Installation:
Check drive belt for coolant and oil residue and replace if
necessary.
Caution!
The drive belt must be replaced if it is contaminated with
hydraulic fluid.
Fit drive belt and check if it is correctly located on pulleys.
Loosen screws (1).
Release screw on belt tensioner (3) at rear.
Withdraw tensioning roller with lever (2) in direction of arrow.
Remove belt tensioner (3).
RA Removing and installing A/C compressor belt tensioner (M57 / M47TU)
BMW AG - TIS
20.02.2013 11:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
