bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Or Replacing Water Pump (M57)|Page 728 > < 1 RA Removing And Installing, Sealing Or Replacing Oil-water Heat Exchanger (M57)|Page 725
Page 1
background image

11 51 000

Removing and installing or replacing water
pump (M57)

Coolant thermostat removed.

Remove and install coolant thermostat,

refer to 11 53 000.

Caution!

When working on the oil, coolant or fuel circuit, you must protect
the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an alternator
malfunction.

Loosen screws (1).

Remove water pump (2).

During the following work steps, the sealing face on the
crankcase must not be damaged.

RA  Removing and installing or replacing water pump (M57)

BMW AG - TIS

20.02.2013  11:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Or Replacing Water Pump (M57)|Page 728 > < 1 RA Removing And Installing, Sealing Or Replacing Oil-water Heat Exchanger (M57)|Page 725