5 Series E39 530d (M57) SAL
If necessary, remove thermostat for EGR cooler.
Installation:
Replace sealing ring between EGR cooler and thermostat for EGR
cooler.
Important!
EGR pipe must not be fitted distorted!
Joint all components loose first.
Secure V-band clamp between EGR cooler and EGR pipe.
Then secure the adjoining components to prescribed
tightening torque.
RA Removing and installing/replacing EGR cooler (M57 / M47TU)
BMW AG - TIS
20.02.2013 12:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -