bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Battery Positive Lead (between Battery Positive Connection Point, Star|Page 823 > < 4 RA Replacing Battery Positive Lead (between Battery Positive Connection Point And S|Page 820
Page 1
background image

12 42 500

Replacing battery positive lead (between
battery positive connection point, starter and
alternator)

Read fault memory. Switch off ignition.

Observe safety instructions for handling vehicle battery.

Instructions for disconnecting and connecting battery,

refer to General Information MG12.

Release terminal clip for battery negative lead on battery.
Disconnect and cover battery negative lead.

If necessary, remove underbody paneling at front.

Detach cover (1).

Unscrew nut (2).

Unclip cable (3) from cable holder (4).

Loosen screws (1).

Remove air duct (2).

E39 cars only:

RA  Replacing battery positive lead (between battery positive connection point, star

BMW AG - TIS

20.02.2013  12:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Battery Positive Lead (between Battery Positive Connection Point, Star|Page 823 > < 4 RA Replacing Battery Positive Lead (between Battery Positive Connection Point And S|Page 820