bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Pressure Accumulator Of Injection System (M57) > < 3 RA Replacing Fuel Filter Unit (M57)
Page 1
background image

13 32 070

Replacing preheating valve (M57)

Caution!

Turn off ignition.

Catch and dispose of escaping fuel.

Caution!

When working on the oil, coolant or fuel circuit, you must protect
the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an alternator
malfunction.

Release clamps (1).

Release fast release coupling (2).

Remove preheating valve (3).

Note:

Check seal on fast release coupling (2) for damage and replace if
necessary.

RA  Replacing preheating valve (M57)

BMW AG - TIS

20.02.2013  12:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Pressure Accumulator Of Injection System (M57) > < 3 RA Replacing Fuel Filter Unit (M57)