5 Series E39 530d (M57) SAL
Unlock plug (2) and detach from glow plug.
Release union nuts (1) on pump line with special tool 13 5 020 .
Tightening torque, 13 53 8AZ.
Disconnect pump line.
Installation:
Observe installation position of rubber mount (3).
Release nuts (1) on H.P. pump.
Remove alternator ribbed V-belt from tensioning roller.
Open screw plug (1).
Tightening torque, 11 14 4AZ.
Installation:
Replace sealing ring.
Release nut (1) on sprocket wheel of H.P. pump.
Tightening torque, 13 52 2AZ.
RA Removing and installing/replacing high-pressure pump (M57)
BMW AG - TIS
20.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -