5 Series E39 530d (M57) SAL
13 53 155
Removing and installing/replacing pressure
accumulator of injection system (M57)
Special tools required:
•
13 5 020
Remove all pressure lines.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
RA Removing and installing/replacing pressure accumulator of injection system (M57)
BMW AG - TIS
20.02.2013 12:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -