5 Series E39 530d (M57) SAL
Unlock connector and pull upwards to remove.
Release hose clamp (1), withdraw hose.
Open hose clip (2) and remove hose (only with park heating).
Unfasten rotary connection with special tool 16 1 020.
Installation:
Replace rubber gasket.
Tighten down rotary connection to correct torque.
Tightening Torque,
refer to 16 14 2AZ
Installation:
When installing the fuel level sensor, ensure the lug (1)
locates in the recess (2) on the tank.
When tightening to torque, notch (3) on screw cap can be
heard and felt to engage in the toothed segment (4) on the
tank.
Carefully raise fuel level sensor (1) and expose spiral hose (2).
Remove fuel level sensor from tank
Caution!
Do not bend sensor.
RA Removing and installing/replacing the sensor for the fuel level gauge (right)
BMW AG - TIS
20.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -