5 Series E39 530d (M57) SAL
E38 vehicle only (M57):
Release drain plug (1) on engine block.
Tightening torque,
refer to Technical Data 11 11 5AZ .
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Adding coolant:
Release vent plug (1) on coolant pipe.
Note:
When filling the cooling system, it is absolutely essential to
adhere to the following sequence:
1.
Slowly fill expansion tank with coolant.
2.
Top up expansion tank right to edge with coolant.
3.
Close vent plug on coolant pipe after bubble-free water
emerges.
Use only recommended coolant,
refer to BMW Service Operating Fluids MG17.
RA Draining and topping up coolant (M47 and M57)
BMW AG - TIS
20.02.2013 13:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
