5 Series E39 530d (M57) SAL
Press hydraulic line in direction of cooling loop.
Pull black locking ring (1) backwards. Keep locking rings pressed.
Detach hydraulic lines from cooling loop.
Installation:
Observe position of hydraulic lines.
Notch on fast release coupling must line up with notch on
cooling loop.
Fast release couplings must snap audibly into place.
Open lock (1) of cooling loop.
Detach sealing lip (2).
Unclip cooling loop (1) in direction of arrow from carrier.
RA Removing and installing or replacing oil cooler/cooling coil for power steering
BMW AG - TIS
20.02.2013 13:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
