5 Series E39 530d (M57) SAL
Support transmission with special tool 23 0 140 / 00 2 030 .
Release screws and remove cross-member.
Tightening torque 23 71 2AZ .
Release screws (1).
Remove cross-member (2).
Release screws.
Tightening torque, 26 11 1AZ .
Installation:
Replace self-locking nuts.
When tightening screws down: Grip each screw and tighten
down nut. This prevents the flexible disk from being subjected
to torsion stress.
RA Removing and installing transmission (GS5-39DZ, M57)
BMW AG - TIS
20.02.2013 13:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -