5 Series E39 530d (M57) SAL
Attach special tool 11 7 050 (1) between engine oil sump (2)
and front axle support (3).
Caution!
Position special tool 11 7 050 (1) so that engine oil sump
rests securely in position.
Release screw (1).
Lever out protective cap (2).
Turn engine with special tool 11 6 480 on vibration damper until
retaining screws of torque converter are visible in opening.
Release retaining screws of torque converter (3 x) with special
tool 24 1 110 .
Tightening torque, 24 40 1AZ.
Installation:
Only use original screws.
Protect torque converter from slipping out. To do so, insert special
tool 24 4 130 / 24 4 135 in opening in transmission housing.
Clamp torque converter.
RA Removing and installing automatic transmission (A5S 360R / 390R, M57)
BMW AG - TIS
20.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
