5 Series E39 530d (M57) SAL
Installation:
Twist torque converter on transmission until bores on lugs
point to center of bore on flywheel.
Screw special tool 24 2 300 into lug.
Installation:
Raise automatic transmission until bore on driver is reached.
Carefully insert transmission into bore on driver with special
tool 24 2 300 .
Flange transmission housing to engine.
Remove special tool 24 2 300 from lug towards front.
RA Removing and installing automatic transmission (A5S 360R / 390R, M57)
BMW AG - TIS
20.02.2013 13:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -