5 Series E39 530d (M57) SAL
26 11 051
Replacing joint disk for propeller shaft
Remove propeller shaft,
refer to 26 11 000.
Unfasten screws and remove joint disk.
Installation:
The screw connection may only be tightened by means of the
nut.
Tightening Torque,
refer to Technical Data 26 11 1AZ.
Installation:
Joint disk must be installed in such a way that arrows point to
flange arms.
Installation:
To prevent contact corrosion, Dacromet-coated washers (1)
must be installed with aluminum drive shafts.
RA Replacing joint disk for propeller shaft
BMW AG - TIS
20.02.2013 14:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
