5 Series E39 530d (M57) SAL
33 32 131
Removing and installing one steering
knuckle/wheel carrier
Caution!
Pull retainer off air supply unit to ensure that accidental
feedback control of the system cannot occur.
Remove wheel,
refer to 36 10 300 .
Unfasten collar nut (1).
Installation:
Replace collar nut.
Tightening torque,
refer to Technical Data 33 41 3AZ .
Secure collar nut by peening on flat area of shaft.
Remove brake shoe expander and support from brake carrier,
refer to 34 41 220.
Remove ABS pulse generator.
Unfasten nut, untighten screw and press swinging arm
downwards.
Installation:
Replace nut. Tightening torque,
refer to Technical Data 33 32 22AZ .
RA Removing and installing one steering knuckle/wheel carrier
BMW AG - TIS
20.02.2013 16:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
