5 Series E39 530d (M57) SAL
A damping disk must be fitted on both front rubber mounts. Fit
damping disk so that it is positively connected.
M57:
Reinstall marked damping disks.
Tightening Torque,
refer to Technical Data 33 33 3AZ.
Note:
Hydraulic rubber mounts may be fitted on cars with M57
engines. In this case, rubber mount removal is identical to the
Touring model,
refer to 33 33 101.
Prepare special tool 33 4 140/ 151/ 154/ 155.
Fit special tool 33 4 140 to recesses in rubber mount.
Use a hot air blower with outlet temperature of max. 600
°
C, heat
bearing bush for approx. 2 minutes (equivalent to approx. 80
°
C
on bearing bush) and remove the rubber mount.
Caution!
When rubber mount is fitted, arrows (1) must point down
longitudinal axis of vehicle.
Coat rubber mount with Circolight anti-friction agent, refer to
BMW Parts Service.
RA Replacing two rubber mounts for rear axle carrier
BMW AG - TIS
20.02.2013 16:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
