5 Series E39 530d (M57) SAL
Installation:
Apply a light coat of Ate brake cylinder paste to cylinder bore,
piston and sealing sleeve,
refer to BMW Service Operating Fluids.
Install sealing cover in rear annular groove of cylinder bore.
Press in piston with a hardwood board.
Caution!
Do not tilt piston.
Press on dust sleeve evenly up to stop with special tool
34 1 132 .
Installation:
The area between dust cover and brake caliper housing must
be kept dry so as to ensure correct seating for the dust cover.
Keep Ate brake cylinder paste or brake fluid away from this
area.
Ensure proper seating of dust cover on piston.
RA Overhauling left or right rear brake caliper (brake caliper removed)
BMW AG - TIS
20.02.2013 16:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
