5 Series E39 530d (M57) SAL
35 41 010
Removing and installing or replacing
accelerator pedal
Remove lower left trim from instrument panel. Disconnect
accelerator cable.
Remove retainer (1).
Disconnect spring (2).
Remove acclerator pedal.
Twist accelerator pedal until linkage lug (2) locates in recess (3) of
accelerator pedal (1).
Installation:
Check bearing bushes (1) and replace if necessary.
Apply light coat of grease to bearing bushes, refer to BMW
Service Operating Fluids.
RA Removing and installing or replacing accelerator pedal
BMW AG - TIS
20.02.2013 16:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
