5 Series E39 530d (M57) SAL
Treatment of expanded foam parts for cavity sealing,
refer to 41 00 ... Installation of cavity sealing, cover for side
member.
Caution!
Keep adequate distance to welding surface.
Burn hazard!
Align and fasten the replacement part.
Install the belt height adjustment and correct the position of the
replacement part if necessary.
Distance (A) = 170 mm
Weld the reinforcement plate to the connection point B-column
from inside the passenger compartment.
Fit individual welding spots so close together that a continuous
seam is created.
Grind down welded surfaces.
Weld the reinforcement plate to the connection point B-column in
the cut-out area.
Fit individual welding spots so close together that a continuous
seam is created.
Grind down welded surfaces.
RA Replacing left or right side member cover (partial replacement of A-column and r
BMW AG - TIS
20.02.2013 17:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
