5 Series E39 530d (M57) SAL
41 51 004
Adjusting left or right front door
Note:
The flaps are fitted and screwed into the unfinished body
shell.
Unpainted surfaces become visible after subsequent
movement.
These surfaces must be touched up with paint in the body
color.
Note:
On 4-door models, it is important to align the rear doors first.
The reason for this is that the rear doors must be aligned to
the welded rear side walls.
The front doors must then be aligned to the rear doors.
The bolted front side walls can then be adapted if necessary
to the front doors.
The illustrations do not always correspond to the type of vehicle
selected in the TIS.
The illustrations are therefore to be viewed as basic illustrations
which are to be carried over to the relevant vehicle type.
Caution!
Keep to the sequence of procedures for correct alignment of
doors. Finish off doors with window regulators and window
panels etc.
Door settling behavior depends on weight!
Loosen strikers.
Gap dimensions,
refer to 41 00 ... Gap dimensions of doors/hood and luggage
compartment lid
refer to 41 00 ... Window and door seams
RA Adjusting left or right front door
BMW AG - TIS
20.02.2013 18:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
