5 Series E39 530d (M57) SAL
51 14 110
Removing and installing / replacing rear
model emblem
The model sign is cemented and cannot be reused after
removal.
The model sign must be installed at room temperature.
Coat nylon string or thread with tenside (e.g. dish
detergent), cut through adhesive layer and remove with
washing benzine.
At paint baking temperatures exceeding 80
°
C, the model
designation must be removed.
sedan:
Apply adhesive tape up to upper edge "A" and mark dimensions as per table.
Dimension in mm
sedan 520 i - 540 i:
A = 23, B = 30, C = 16
sedan 525 td, tds:
A = 23, B = 30, D = 20
touring:
RA Removing and installing / replacing rear model emblem
BMW AG - TIS
20.02.2013 19:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
