5 Series E39 530d (M57) SAL
51 11 170
Replacing body molding for left or right
bumper
Lever out body molding with special tool 00 9 321 (fishbone) first
at front and then at side.
Version without Park Distance Control (PDC):
Remove body molding.
Version with Park Distance Control (PDC):
Disconnect plug connections on ultrasonic sensors and remove
body molding.
If necessary, lever chrome strip (1) out of clips (2) of body molding
and remove.
Version with PDC:
Lever out catches (1) and remove ultrasonic sensors (2).
Remove catches (3) and mounts (4) from body molding (5).
RA Replacing body molding for left or right bumper
BMW AG - TIS
20.02.2013 19:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
