5 Series E39 530d (M57) SAL
Installation:
In event of replacement or partial detachment, lay butylene
tape (sourcing reference: BMW Parts Service) on inner door
plate or sound insulation.
Seal cable penetrations with butylene tape.
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation (2).
Caution!
When working with adhesive cleaners in enclosed rooms:
Ensure room is well ventilated.
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
If necessary, clean the specified adhesive area with adhesive
cleaner (sourcing reference: BMW Parts Service).
Air drying time: 1 minute
RA Removing and installing/replacing sound insulation in front door, left or right
BMW AG - TIS
20.02.2013 20:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
