bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing_replacing Rear Panel On Front Seat Backrest (luxury Seat > < 10 RA Removing And Installing_replacing Top Rear Panel On Front Seat Backrest (luxury |Page 2404
Page 1
background image

52 17 202

Removing and installing/replacing bottom
rear panel on front seat backrest (luxury seat)

Note:

This document is also applicable to

L7 driver's seat with video system in rear compartment.

Head-rest must be moved as far forwards as possible.

Remove top rear panel,

refer to 52 17 200.

Pull inside edge of rear panel inwards / backwards (1) and knock
firmly inwards (2) (spring disconnected at bottom inside edge).

Press inside edge of rear panel outwards (3) and pull outwards
and backwards (4) (spring disconnected at bottom outside edge).

Lift rear panel upwards / backwards (5).

Installation:

The springs must be correctly located in the rear panel
supports and must not be bent.

If necessary, replace defective clips.

RA  Removing and installing/replacing bottom rear panel on front seat backrest (luxu

BMW AG - TIS

20.02.2013  20:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

12 RA Removing And Installing_replacing Rear Panel On Front Seat Backrest (luxury Seat > < 10 RA Removing And Installing_replacing Top Rear Panel On Front Seat Backrest (luxury |Page 2404