bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Replacing Glass Sliding_tilting Sunroof Lid > < 6 RA Removing And Installing Glass Sliding_tilting Sunroof Lid|Page 2462
Page 4
background image

Caution!

Check that glass sunroof lid is securely seated.

Press glass sunroof lid at front on left/right with ball of thumb
from bottom to top.

The glass sunroof lid must not be able to be raised.

Setting lever with retaining screw:

Open glass sunroof lid approx. 250 mm.

Carefully press glass sunroof lid upwards and screw in and tighten
down securing screws (2) on left/right completely.

Setting lever without retaining screw:

If setting levers with retaining screws (1) are fitted, do not install
any retaining screws in thread (2).

Make sure retaining spring (1) is correctly seated.

Adjusting glass slide/tilt sunroof lid.

RA  Removing and installing glass sliding/tilting sunroof lid

BMW AG - TIS

20.02.2013  21:08

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

7 RA Replacing Glass Sliding_tilting Sunroof Lid > < 6 RA Removing And Installing Glass Sliding_tilting Sunroof Lid|Page 2462