bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Replacing Both Windshield Wiper Blades > < 2 RA Relay Carrier
Page 1
background image

61 61 010

Checking/adjusting approach angle of
windshield wiper arms on front windscreen

At low vehicle speed and during intermittent operation, a precisely
adjusted contact angle for the windshield wiper arms will increase
wiping quality.

Place special tool 00 9 230 on windshield next to turning point of
wiper blade.

Passenger side:

If the contact angle is faulty, grip windshield wiper arm with special
tool 00 9 261 at joint and turn with special tool 00 9 262 into
correct position.

Driver's side:

The contact angle of the wiper arm is adjusted by moving the
wiper arm on the dial (1).

To remove dial: use special tool 61 6 000 or 61 0 060.

RA  Checking/adjusting approach angle of windshield wiper arms on front windscreen

BMW AG - TIS

20.02.2013  22:09

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Replacing Both Windshield Wiper Blades > < 2 RA Relay Carrier