bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

25 Brake Lights > < 1 RA Replacing A Socket Housing For Rear Light On Left Or Right (saloon_sedan)|Page 2702
Page 1
background image

63 21 180

Removing and installing/replacing left or right
rear light (saloon/sedan)

Up to 09/2000:

Remove socket housing for rear light.

Release nuts and remove outer rear light.

From 09/2000:

Disconnect plug connection (1).

Release nuts (2) and remove outer rear light.

All:

Only replace:

If necessary, convert or replace bulbs.

Installation:

Make sure rear light seal is correctly seated, replace if necessary.

Make sure there is a uniform gap all round between rear light and
body side panel, gap approx. 2 mm. 

RA  Removing and installing/replacing left or right rear light (saloon/sedan)

BMW AG - TIS

20.02.2013  22:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

25 Brake Lights > < 1 RA Replacing A Socket Housing For Rear Light On Left Or Right (saloon_sedan)|Page 2702