5 Series E39 530d (M57) SAL
64 11 200
Removing and installing / replacing heater
(heater)
Unfasten clip from right and left air ducts, twist air duct and lift out.
Installation:
Fit air duct to end wall, twist and then insert in bottom of
microfilter.
Unfasten clips (1 to 3) and remove water hoses. Carefully blow out
lines to clear remaining coolant from heater.
Unfasten screws on end wall.
RA Removing and installing / replacing heater (heater)
BMW AG - TIS
20.02.2013 22:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
