5 Series E39 530d (M57) SAL
Detach air flap (1) in direction of arrow from shaft.
Unclip retainer (2).
Release screws (4) and pull housing section (3) in direction of
arrow out of guide.
Screw on hose clamps (1) and detach pipes in direction of arrow.
Installation:
Replace sealing rings.
Ensure sealing rings and hose clamps (1) are correctly seated.
Pull out housing section (2) in direction of arrow.
Pull out heater element (3) in direction of arrow.
Caution!
Do not bend cooling fins.
If necessary, clean or align cooling fins with fin comb.
RA Replacing heater core (air conditioner control)
BMW AG - TIS
20.02.2013 22:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -