bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing Complete Auxiliary Heater (Thermo Top Z_C) > < 3 RA Flushing Cooling System When Replacing Latent Heat Accumulator Due To Salt Leaks
Page 1
background image

 64 12 005

Checking function of independant heating
(Thermo Top S)

Carry out function check as described in DIS

Remove front left wheel.

Remove trim panel from front left wheelhouse.

Release screws (2) and turn over heater.

Release screws and remove central cover. 

Connect V adapter cable 64 1 230 between wiring harness and
heater and connect to 26-pin peripherals box 61 1 459.

Reinstall heater.

Observe installation notes:

refer to 64 12 500

RA  Checking function of independant heating (Thermo Top S)

BMW AG - TIS

20.02.2013  23:15

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing Complete Auxiliary Heater (Thermo Top Z_C) > < 3 RA Flushing Cooling System When Replacing Latent Heat Accumulator Due To Salt Leaks