5 Series E39 530d (M57) SAL
64 22 190
Removing and installing / replacing fresh-air
grill in rear of car
Depending on the equipment version, a can holder or a finisher
strip may be installed. Both versions are removed in the same
way.
Press fresh-air grill (1) somewhat upward and unclip can holder
(2) from guide groove at top.
Guide in special tool 00 9 300 between center console and can
holder and lift out can holder (2).
Push down fresh-air grill (1) by dimension A (approx. 30 to 40 mm)
and pull out of recesses of guide groove.
Installation:
Thread fresh-air grill centered into recesses (1) of guide
groove and press completely upward. Then install finisher or
can holder.
RA Removing and installing / replacing fresh-air grill in rear of car
BMW AG - TIS
20.02.2013 23:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
